A Firefox extension that demonstrates HTTP session hijacking attacks. System Requirements. Mac OS X: 10.5 or newer on an Intel processor.
- .) defconf - fixed RouterOS default configuration (introduced in v6.40.3);.) dhcp - fixed downgrade from RouterOS v6.41 or higher;.) dhcpv6 client - added IAID check in reply.
- RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload). This update will convert all interface 'master-port' configuration into new bridge configuration, and eliminate 'master-port' option as such.
- .) defconf - fixed RouterOS default configuration (introduced in v6.40.3);.) dhcp - fixed downgrade from RouterOS v6.41 or higher;.) dhcpv6 client - added IAID check in reply.
- RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload). This update will convert all interface 'master-port' configuration into new bridge configuration, and eliminate 'master-port' option as such.
6.41rc34 changelog:
*) crs3xx - improved packet processing in slowpath;*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) ethernet - removed 'master-port' parameter;
*) log - fixed 'unknown' interface name in log messages;
*) lte - added '/interface lte apn' menu (Passthrough requires reconfiguration) (CLI only);
*) lte - do not reset modem when it is not possible to access SMS storage;
*) snmp - fixed 'ifHighSpeed' value of VLAN, VRRP and Bonding interfaces;
*) snmp - fixed '/caps-man registration-table' uptime values;
*) tile - improved hardware encryption processes;
*) vlan - do not allow VLAN MTU to be higher than L2MTU;
*) wireless - fixed rate selection process when 'rate-set=configured' and NV2 protocol is used;
Other changes since 6.40.3:
!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
!) switch - 'master-port' conversion into a bridge with hardware offload 'hw' option;
https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
!) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
*) address - show warning on IPv6 address when acquire from pool has failed;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) arp - properly update dynamic ARP entries after interface related changes;
*) bridge - added initial support for hardware 'igmp-snooping' on CRS1xx/2xx;
*) bridge - automatically turn off 'fast-forward' feature if both bridge ports have 'H' flag;
*) bridge - changed 'Host' and 'MDB' table column order;
*) bridge - fixed 'fast-forward' counters;
*) bridge - fixed 'R' state for bridge interfaces on x86 and CHR installations (introduced in v6.41rc12);
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge;
*) bridge - fixed multicast forwarding (introduced in v6.40rc36);
*) bridge - implemented dynamic entries for active MST port overrides;
*) bridge - implemented software based 'igmp-snooping';
*) bridge - implemented software based MSTP;
*) bridge - removed 'frame-types' and 'ingress-filtering' for bridge interfaces (introduced in v6.40rc36);
*) bridge - show 'admin-mac' only if 'auto-mac=no';
*) bridge - show bridge interface local addresses in the host table;
*) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) capsman - added 'vlan-mode=no-tag' option;
*) capsman - return complete CA chain when issuing new certificate;
*) certificate - fixed import of certificates with empty SKID;
*) certificate - fixed SCEP 'get' request URL encoding;
*) certificate - show 'Expired' flag when initial CRL fetch fails;
*) chr - added KVM memory balloon support;
*) chr - added suspend support;
*) console - do not stop '/certificate sign' process if console times out in 1 minute;
*) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) crs317 - added L2MTU support;
*) crs326 - fixed packet processing speed on switch chip if individual port link speed differs;
*) crs3xx - added port ingress and egress rate limiting;
*) CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) dhcp - fixed DHCP services failing after reboot when DHCP option was used;
*) dhcp - fixed unresponsive DHCP service caused by inability to read not set RAW options;
*) dhcp - require DHCP option name to be unique;
*) dhcpv4-client - allow to use DUID for client as identity string as the option 61;
*) dhcpv6 client - added IAID check in reply;
*) dhcpv6-client - fixed IA check on solicit when 'rapid-commit' is enabled;
*) dhcpv6-client - ignore unknown IA;
*) dhcpv6-client - require pool name to be unique;
*) e-mail - auto complete file name on 'file' parameter (introduced in v6.40);
*) e-mail - do not show errors when sending e-mail from script;
*) eoip - made L2MTU parameter read-only;
*) export - fixed interface list export;
*) export - fixed wireless 'ssid' and 'supplicant-identity' compact export;
*) hotspot - fixed missing '/ip hotspot server profile' if invalid 'dns-name' was specified;
*) hotspot - improved user statistics collection process;
*) ike1 - release mismatched PH2 peer IDs;
*) ike1 - remove PH1 and PH2 when 'mode-config' exchange fails;
*) ike2 - check identities on 'initial-contact';
*) ike2 - use peer configuration address when available on empty TSi;
*) interface - added '/interface reset-counters' command (CLI only);
*) interface - added option to join and exclude '/interface list' from one and another;
*) interface - fixed corrupted '/interface list' configuration after upgrade;
*) ippool6 - try to assign desired prefix for client if prefix is not being already used;
*) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only);
*) ipsec - allow to specify 'remote-peer' address as DNS name;
*) ipsec - kill PH1 on 'mode-config' address failure;
*) ipsec - renamed 'firewall' argument to 'notrack-chain' in peer configuration;
*) ipv6 - add dynamic '/ip dns' server address from RA when RA is permitted by configuration;
*) ipv6 - fixed IPv6 address request from pool (introduced in v6.41rc1);
*) l2tp-server - fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
*) lcd - fixed 'flip-screen=yes' state after reboot;
*) lcd - fixed unresponsive LCD (introduced in v6.41rc15);
*) log - added 'bridge' topic;
*) log - optimized 'poe-out' logging topic logs;
*) lte - added Passthrough support (CLI only);
*) lte - added support for ZTE ME3630 E1C with additional '/port' for GPS usage;
*) lte - added Yota non-configurable modem support;
*) lte - automatically add '/ip dhcp-client' configuration on interface;
*) lte - changed default values to 'add-default-route=yes', 'use-peer-dns=yes' and 'default-route-distance=2';
*) lte - fixed mode initialization after reboot;
*) lte - integrated IP address acquisition without DHCP client for wAP LTE kit-US;
*) lte - properly recognize USB devices under '/system resource usb' (introduced in v6.41rc12);
*) modem - added initial support for Alcatel IK40 and Olicard 500;
*) ospf - fixed OSPF v2 and v3 neighbor election;
*) ppp - added support for Sierra MC7750, Verizon USB730L;
*) ppp - fixed missing PPP client interface after reboot (introduced in v6.41rc);
*) ppp - fixed serial port loading (introduced in v6.41rc);
*) ppp - fixed situation when part of PPP configuration was reset to default values after reboot;
*) pppoe - fixed invalid PPPoE server or client after reboot or 'interface' edit (introduced in v6.41rc9);
*) pppoe-server - fixed situation when PPPoE servers become invalid on reboot;
*) rb931-2nd - fixed startup problems (requires additional reboot after upgrade);
*) routerboard - fixed '/system routerboard upgrade' for CRS212-8G-4S;
*) sfp - fixed SFP interface power monitor when bad SFP DDMI information is received;
*) sfp - fixed temperature readings for various SFP modules;
*) sftp - added functionality which imports '.auto.rsc' file or reboots router on '.auto.npk' upload;
*) sniffer - fixed VLAN tag reporting for TX packets (introduced 6.41rc14);
*) snmp - fixed '/system license' parameters for CHR;
*) snmp - fixed bridge host requests on devices with multiple bridge interfaces;
*) tile - improved reliability on MPLS package processing;
*) traceroute - improved '/tool traceroute' results processing;
*) ups - fixed duplicate 'failed' UPS logs;
*) userman - fixed unresponsive RADIUS server (introduced in v6.40.3);
*) webfig - improved reliability of login process;
*) winbox - added 'notrack-chain' setting to IPSec peers;
*) winbox - do not show duplicate 'Template' parameters for filter in IPSec policy list;
*) winbox - do not show duplicate filter parameters 'Published' in ARP list;
*) winbox - fixed bridge port sorting order by interface name;
*) winbox - show warnings under '/system routerboard settings' menu;
*) wireless - added 'allow-signal-out-off-range' option for Access List entries (CLI only);
*) wireless - improved reliability on 'rx-rate' selection process;
*) wireless - log 'signal-strength' when successfully connected to AP;
*) wireless - pass interface MAC address in Sniffer TZSP frames;
*) wireless - updated United Kingdom regulatory domain information;
Download the new 'RouterOS 6.41rc34' version here: https://www.mikrotik.com/download
Defconf - fixed RouterOS default configuration (introduced in v6.40.3); - dhcp - fixed downgrade from RouterOS v6.41 or higher; - dhcpv6 client - added IAID check in reply; - dhcpv6-client - fixed IA check on solicit when 'rapid-commit' is enabled; - dhcpv6-client - ignore unknown IA; - dhcpv6-client. MikroTik is a Latvian company which was founded in 1996 to develop routers and wireless ISP systems. MikroTik now provides hardware and software for Internet connectivity in most of the countries around the world.
Looking for Windows XP Product Key 2019 then those keys are help you to active your windows Xp programed very much easily and perfectly. There are a lots of keys are available in internet but only here we provide working and 100% testing keys those are easily make your windows Xp Professional level and you can do all everything easily on your pc. Xp product key. According to the license agreement, the product keys for retail edition of XP can only be used on one PC, but the ones for VOL edition can be supplied for more PCs to use. Second, there is another important difference, the retail edition of XP needs to activate, yet VOLs don't have this concept totally. Windows XP Professional product key secret's an operating gadget created through Microsoft in 2001. Soon after its release, it has become the most widely used non-public operating device in the world. Even today, it has heaps of users, regardless of the fact that Microsoft stopped imparting assist in 2011.
mikrotik-dweet-stats
Routeros V6.40.4
| # |
| # MikroTik RouterOS Script |
| # This script has two parts: 1) RouterOS statistics collector 2) Push router stats up to dweet.io |
| # |
| # This script can be adapted to send the collected statistics to any NMS system that supports |
| # receiving data via http get/post requests. |
| # |
| # Tested on RouterOS v6.40.3 |
| # Learn more about this script and dweet.io by reading.. |
| # http://jcutrer.com/howto/networking/mikrotik/mikrotik-script-dweet-io-stats |
| # |
| # Script Revision: 1.0.2 |
| # Author Name: Jonathan Cutrer |
| # Author URL: http://jcutrer.com |
| # |
| # Change Log |
| # |
| # 1.0.2 Reworked stats collection in groups, you can turn each on/off below |
| # Changed dweet.io call to use SSL (https://) |
| # Added VPN stats collection |
| # Added Health stats collection |
| # Added Routing Protocol stats collection |
| # |
| # 1.0.1 Added keep-result=no to last line |
| # |
| # 1.0.0 Initial Release |
| # |
| # |
| # Begin Setup |
| # |
| :local interfaceWAN 'pppoe-out1'; |
| :local interfaceWLAN 'wlan2'; |
| :local interfaceWLANGuest 'wlan2.2'; |
| :local prefix 'mikrotik-stats'; |
| :local dweetURL 'https://dweet.io/dweet/quietly/for/'; |
| :local dataParams; |
| # |
| # Collection Groups |
| # Define what gets groups of statistics get collected and sent |
| # |
| :local enBoard true |
| :local enPerf true |
| :local enHealth true |
| :local enRouter true |
| :local enRouting true |
| :local enFirewall true |
| :local enWireless true |
| :local enVPN true |
| # |
| # End Setup |
| # |
| # Collect Stats: Board |
| # |
| :local boardData; :local identity; :local model; :local serial; |
| if ( $enBoard ) do={ |
| :put 'Collecting Board data..' |
| :set identity [/system identity get name]; |
| :set model [/system routerboard get model]; |
| :set serial [/system routerboard get serial-number]; |
| :set boardData 'identity=$identity&serial=$serial' |
| :set dataParams $boardData; |
| } |
| # Set the thing name |
| :local thing '$prefix-$serial' |
| # |
| # Collect Stats: Perf |
| # |
| :local perfData; :local cpuLoad; :local memFree; local memTotal; :local uptime; |
| if ( $enPerf ) do={ |
| :put 'Collecting Performance data..' |
| :delay 5 |
| :set cpuLoad [/system resource get cpu-load]; |
| :set memFree [/system resource get free-memory]; |
| :set memTotal [/system resource get total-memory]; |
| :set uptime [/system resource get uptime]; |
| :set perfData 'cpu-load=$cpuLoad&uptime=$uptime&mem-free=$memFree&mem-total=$memTotal' |
| :set dataParams ( $dataParams . '&' . $perfData); |
| } |
| # |
| # Collect Stats: Wireless |
| # |
| :local wirelessData; :local wlanClients; :local wlanGuests; |
| if ( $enWireless ) do={ |
| :put 'Collecting Wireless data..'; |
| :set wlanClients [/interface wireless registration-table print count-only where interface='$interfaceWLAN']; |
| :set wlanGuests [/interface wireless registration-table print count-only where interface='$interfaceWLANGuest']; |
| :set wirelessData 'wlan-clients=$wlanClients&wlan-guests=$wlanGuests'; |
| :set dataParams ( $dataParams . '&' . $wirelessData); |
| } |
| # |
| # Collect Stats: Firewall |
| # |
| :local firewallData; :local ipFwConx; |
| if ( $enFirewall ) do={ |
| :put 'Collecting Firewall data..'; |
| :set ipFwConx [/ip firewall connection tracking get total-entries]; |
| :set firewallData 'ip-fw-conx=$ipFwConx'; |
| :set dataParams ( $dataParams . '&' . $firewallData); |
| } |
| # |
| # Test Output of Collected Data |
| # |
| :put $boardData |
| :put $perfData |
| :put $wirelessData |
| :put $firewallData |
| # |
| # Build the Final Request URL |
| # |
| :local finalURL; |
| :set finalURL '$dweetURL$thing?$dataParams' |
| # print the final url |
| :put $finalURL |
| # |
| # Push data to dweet.io |
| # |
| /tool fetch url='$finalURL' mode=https keep-result=no |
| # end of script |
Sign up for freeto join this conversation on GitHub. Already have an account? Sign in to comment
Routeros V6 40.3 Download
Name Last modified Size Description; Parent Directory - CHANGELOG3: 2009-09-18 15:12: 56K: CHANGELOG4: 2011-05-25 21:35.
